ฟังก์ชั่นเจนเนอร์เรเตอร์ เครื่่องกำเนิดสัญญาณความถี่ Rigol JDS6600 60MHz Digital DDS Dual-Channel Arbitrary Waveform Generator Frequency

FGN012

มีสินค้าอยู่ 1

รายละเอียดสินค้า

Features:

JDS6600 series Dual-channel Function Signal generator combines multiple functions in one, such as Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Sweep, Counter and Frequency Meter, etc.
The instrument adopts the Direct Digital Synthesizer(DDS) technology and provides stable, precise, pure and low distortion signals.
With output short-circuit protection: all signal output can work 60s under load short-circuit condition.
Use soft silicone keys instead of traditional patch keys, high sensitivity and convenient for operation.
It's a great testing or measuring instrument for electronics engineers, electronic laboratory, teaching and researching.

Specifications

Waveform specifications:

Waveform: Sine, square, triangle, pulse (duty-cycle correction, pulse width and cycle time adjustable), arbitrary wave, CMOS, DC level, half-wave, full-wave, pos-ladder, neg-Ladder, noise, exponential rise, exponential fall, tone, cink pulse, lorentz pulse, and 60 kinds user-defined waveforms.
Waveform vertical resolution: 14 bits
Waveform sampling rate: 266 MSa/s
Waveform length: 2048 points
Sine – Harmonic suppression: ≥45dBc(Sine – Total harmonic distortion: <0.8%(20 Hz~20 kHz,0dBm)
Square and Pulse – Overshoot (Square): ≤5%
Square and Pulse – Duty-cycle range(Pulse): 0.1 – 99.9%
Ramp wave – Linearity: ≥98%(0.01 Hz~10 kHz)

Output specifications:

Waveform specifications:

Output impedance: 50Ω±10%(typical)
Protection: Short circuit 60S will not be damaged
DC Offset:
Offset adjusting range: Output Amplitude>2V,-9.99V~9.99V;0.2VOffset resolution: 0.01 V

Phase specifications:

TTL/COMS Output:

External measurement functions:

Frequency meter function – Frequency measurement range: 1 Hz~100 MHz
Frequency meter function – Measurement accuracy: Gate time continuously adjusted between 0.01S~10s
Counter function – Counting region: 0-4294967295
Counter function – Coupled mode: 2 Coupling modes, DC and AC
Counter function – Counting mode: Manual operation.
Input signal voltage range: 2 – 20 Vpp
Pulse width measurement: 0.01us (resolution), 20s (MAX measuring time)
Period measurement: 0.01us (resolution), 20s (MAX measuring time)

General technical parameters:

Display type: 2.4 inch TFT color LCD
Storage and loading – Quantity: 100 groups
Storage and loading – Location: 00 to 99(extract 00 place data at default boost state)
Arbitrary wave – quantity: 1 to 60, totally 60 groups (default boost 15 groups)
Interface mode: USB to serial interface
Extension interface: There is serial interface of TTL level mode to be convenient for secondary development.
Communication speed – Adopt standard: 115200 bps
Communication protocol – Adopt command: line mode, open protocol
Power supply: DC 5 V±0.5 V
Manufacturing process: Surface-mount technology, large scale integrated circuit, high reliability, long service life
The user can set ON or OFF by procedure
Operating characteristics: Full button operation, knob continuous adjustment.