รายละเอียดสินค้า
รีโมทควบคุมลิเนียร์มอเตอร์ ดีซีมอเตอร์ กลับทางหมุนได้ DC 12V 24V 36V Motor Remote Control Switch 2CH Motor Up Down Stop Forwards Receiver Wireless Switch
>> เช็คสต๊อคสินค้า <<
Specification
- Working Voltage: DC 12V-36V
(AC&DC both are ok. Wide working voltage from 12V to 36V(12V 24V 36V)
- Working Current: 48ma
- Quiescent current:16ma
- Max Load: 10A Relay ( have better load less than 5A (60W)
- Size:100*60*30mm
- Function: Receiver Manual Button Control & Wire External Button (without transmitter)
Wire the Normally Open Limited to the External Button Pin ( U–S–D–GND) make your motor Forwards Reverse Cycle
- Original State OFF, (Suddenly, the electricity was cut off, then comes again, the State still is OFF, you need manual turn it ON)
- Out State: Momentary Toggle Latched Adjusted by the Jumper on the Receiver,
( we ship default as Latched, if you need use Momentary to change the Jumper on the Receiver ,Notice, please don’t use Toggle) - Momentary———-Jumper on “1&2”
- Latched———–Jumper on “3&4”
- Momentary ————-
– Press button”Up”, the Motor Forward, Release is Stop.
– Press Button “Down”, the Motor Reverse, Release is Stop.
Latched——————
– Press button “Up”, the Motor Forward, Press Button “Stop” is stop.
– Press Button “Up”, the Motor Reverse, Press Button”Stop” is stop - If you don’t need wire the Limited Switch, you need connect the UP Down and COM with a Line, we have connect it before we ship out ,if you need use it take away the line that is ok.
- When the receiver output state is “Latched”, we have set it 0.5s time delay for forwards and reverse, it is the Protection function.
รับประกันสินค้า 1 เดือน
รีวิว
ยังไม่มีบทวิจารณ์